29 x 2.4"
Full Frame & Top-tube bag mounts, rear rack + mudguard mounts and 3 sets of Bottle mounts
Pinion 12-speed 600% - 10,000km and more maintenance-free
All-terrain, rigid fork or 100 mm travel fork, raised chest position
Internal cable duct for rear light
Gravel or straight
Hard gravel, trail
The Chiru Kegeti titanium frame takes its name from the Kegeti Pass, a peak at almost 4000m altitude and the highlight of the Silk Road Mountain Race. Chiru Kegeti Pinion is equipped with a 600% ratio gearbox and has been designed to meet the needs of long-distance adventurers in difficult terrain. Its geometry and design emphasize comfort for long hours in the saddle.
Kegeti Pinion, a titanium hybrid Gravel-MTB frame designed for extreme conditions
The Kegeti Pinion titanium frame brings an even more extreme degree of reliability than the Kegeti with mechanical transmission. Equipped with an integrated PINION transmission, this sealed gearbox protects the transmission from water and dirt. It requires no maintenance apart from an oil change every 10,000 km. Its components are designed to last at least 60,000 km.
A titanium frame that’s half gravel, half mountain bike, so you can set off on adventures with peace of mind
The Kegeti Pinion titanium frame can be fitted with a drop bar or flat handlebar. Thanks to the numerous attachment points on the frame, it can carry a large amount of luggage and at least 3 bottles of water. Its MTB-standard wheels and tires distinguish it from a gravel bike.
The Chiru Kegeti titanium frame takes its name from the Kegeti Pass, a peak at almost 4000m altitude and the highlight of the Silk Road Mountain Race. Chiru Kegeti Pinion is equipped with a 600% ratio gearbox and has been designed to meet the needs of long-distance adventurers in difficult terrain. Its geometry and design emphasize comfort for long hours in the saddle.
Kegeti Pinion, a titanium hybrid Gravel-MTB frame designed for extreme conditions
The Kegeti Pinion titanium frame brings an even more extreme degree of reliability than the Kegeti with mechanical transmission. Equipped with an integrated PINION transmission, this sealed gearbox protects the transmission from water and dirt. It requires no maintenance apart from an oil change every 10,000 km. Its components are designed to last at least 60,000 km.
A titanium frame that's half gravel, half mountain bike, so you can set off on adventures with peace of mind
The Kegeti Pinion titanium frame can be fitted with a drop bar or flat handlebar. Thanks to the numerous attachment points on the frame, it can carry a large amount of luggage and at least 3 bottles of water. Its standard MTB wheels and tires set it apart from other gravel bikes.
| Material | Titanium Grade 9 3Al/2.5V, proprietary tubing with differentiated cross-section and thickness. |
| Finish | Brushed, Logo laser engraved |
| Tire clearance | 29 "x 2.4" |
| Transmission compatibility | Pinion C1.12 gearbox |
| Through axis | Rear: 148x12 mm |
| Mounting points |
|
| Head tube | 56/44 mm conical |
| Rear brake mount | Standard Postmount 160 mm, Rotor max. 180 mm |
| Routing |
|
| Seat post | Diameter 27.2 mm |
| Seat tube clamp | Diameter 31.8 mm |
| Accessories included |
|
| Material | Carbon |
| Finish | Mat clear varnish |
| Tire clearance | 29 "x2.8" |
| Through axis | 110x15 mm x p1.5 |
| Mounting points |
|
| Pivot | tapered 1" 1/8-1.5", L: 300 mm |
| Routing | Internal for front brake hose Internal for dynamo cable |
| Brake mount | Post mount 160 mm |
| Length and offset | 485 x 51 mm |
| Weight | 690 g |
| Accessories included |
|
| Material | Titanium |
| Finish | Hand-brushed, laser-engraved logo |
| Tire clearance | 700cx2.35" (60 mm) & 650bx2.4" |
| Through axle | 110x15 mm x p1.5 |
| Mounting points |
|
| Pivot | tapered 1" 1/8-1.5", L: 290 mm, diam. int. 25 mm |
| Routing | Internal for front brake housing Internal for dynamo cable |
| Brake mount | Flat mount 140 or 160 mm |
| Length and offset | 475 x 50 mm |
| Weight | 785 g |
| Accessories included |
|
| Type / Cage material | Internal bearing / Aluminum |
| Compatible model | All models with 85.5 mm BB shell width |
| Compatible crankset | Shimano 24 mm axle crankset |
| Bearing | ABEC-3 / Titanium nitride-coated bearing cage |
| Spacer | Aluminium, for BB shell width 85.5mm |
| Clamping crown | 16 notches / dia. 48.5 |
| Mounting tool | Park tool 27.3 |
| Color | Black |
| Material | Aluminum |
| Compatible model | All Chiru ranges after 2021 except Kunlun and Savage |
| Compatible derailleur | All types of derailleur: Sram, Shimano, Campagnolo, Rotor, Microshift |
| Axle compatibility | M12x1.0 |
| Color | Black |
| Material | Unidirectional Carbon |
| Accessories | Aluminium + 316 stainless steel screws |
| Length | 300 mm |
| Offset | 0 |
| Diameter | 27.2 mm |
| Saddle rail compatibility | 7 mm round or 7x10 mm carbon rail |
| Weight | 195 g |
| Material | Titanium 3Al/2.5V |
| Accessory | Titanium cradle + titanium screws |
| Length | 280 mm |
| Offset | 13 mm |
| Diameter | 27.2 mm |
| Saddle rail compatibility | 7 mm round or 7x10 mm carbon rail |
| Weight | 180 g |
| User weight limit | 100 kg |
| Material | Titanium 3Al/2.5V |
| Accessories | Titanium cradle + titanium screws |
| Length | 330 mm |
| Offset | 13 mm |
| Diameter | 27.2 mm |
| Saddle rail compatibility | 7 mm round or 7x10 mm carbon rail |
| Weight | 210 g |
| User weight limit | 100 kg |
| Material | Titanium 3Al/2.5V |
| Accessory | Titanium cradle + titanium screws |
| Length | 380 mm |
| Offset | 13 mm |
| Diameter | 27.2 mm |
| Saddle rail compatibility | 7 mm round or 7x10 mm carbon rail |
| Weight | 230 g |
| User weight limit | 100 kg |
| Body / screws material | Titanium 3Al/2.5V and 6Al/4V |
| Length | 60, 70, 80, 90, 100, 110mm |
| Angle | +/-5 Deg |
| Pivot clamping height | 48 mm |
| Handlebar clamping diameter | 31.8 mm |
| Width of handlebar clamping area | 50 mm |
| Finish | Hand-brushed, laser-engraved logo |
| Weight | 135 g |
| Material | Titanium 3Al/2.5V |
| Max. width | 760 mm |
| Width Min | 680 mm |
| Drop/rise | 0 mm |
| Clamping diameter | 31.8 mm |
| Max. width clamping | 95 mm on supplied spacer |
| Back Sweep | 16 deg. |
| Up Sweep | 15 mm |
| Weight | 255 g |
| Material | Titanium 3Al/2.5V |
| Max. width | 760 mm |
| Width Min | 680 mm |
| Drop/rise | 0 mm |
| Clamping diameter | 31.8 mm |
| Max. width clamping | 95 mm on supplied spacer |
| Back Sweep | 16 deg. |
| Up Sweep | 15 mm |
| Weight | 365 g ( hanger 320g + spacer 45 g ) |
| Material | Titanium 3Al/2.5V, Lazer soda |
| Adjustment range position | 25 mm |
| Bottle capacity | 600 to 800 ml |
| Fasteners | 2 x M5x10 Ti, Torx25 socket |
| Handling | Easy entry and exit |
| Maintenance | Secure, deformation-adjustable can holder |
| Finish | Sandblasting |
| Weight | 34 g |
| Size | S | M | L | XL |
|---|---|---|---|---|
| TT (mm) | 560 | 585 | 600 | 620 |
| S (mm) | 465 | 520 | 545 | 555 |
| RC (mm) | 445/462.5 | 445/462.5 | 445/462.5 | 445/462.5 |
| W (mm) | 1089 | 1112 | 1112 | 1133 |
| BB (mm) | 70 | 70 | 70 | 70 |
| HT (mm) | 120 | 140 | 170 | 180 |
| SA (deg.) | 74.3 | 74 | 73.5 | 73.5 |
| HA (deg.) | 69 | 69 | 70 | 70 |
| AC (mm) | 485 | 485 | 485 | 485 |
| O (mm) | 50 | 50 | 50 | 50 |
| ST (mm) | 612 | 631 | 665 | 675 |
| R (mm) | 388 | 404 | 403 | 420 |
| Rider (cm) | Inseam (cm) | Frame |
|---|---|---|
| 163-173 | - | S |
| 173-180 | - | M |
| 180-190 | - | L |
| +190 | - | XL |
Rejoignez la communauté Chiru et restez informé de nos actualités, bons plans et promotions.
